Snapper PRO SS100 Serie Manuel D'utilisation page 17

9
FIRST, place your hands on the ground speed control levers
and the maximum forward speed bar as shown.
SECOND, to go forward gradually push the ground speed
control levers with the palms of your hands evenly towards
the maximum forward speed lever.
THIRD, to speed up squeeze the ground speed control levers
to the maximum forward speed lever. To slow down smoothly,
slowly move the levers evenly towards neutral.
Basic Driving
Forward Travel Practice
10
Gradually move both ground speed control levers evenly
FORWARD from neutral. Slow down and repeat.
Note: Straight forward travel takes practice. If the unit veers
to either direction while both ground speed controls levers
are pressed against the maximum forward speed bar see
Tracking Adjustment in the Maintenance Procedures section.
Reverse Travel Practice
11
LOOK DOWN & BEHIND, then gradually move both ground
speed control levers evenly BACK from neutral. Slow down
and repeat.
Note: Practice backing up for several minutes before
attempting to do so near objects. The zero-turn riding mower
turns sharply in reverse as well as forward, and backing up
straight takes practice.
Practice Turning Around a Corner
12
While traveling forward allow one handle to gradually return
back toward neutral. Repeat several times.
Note: To prevent pivoting directly on the tire tread, it is best to
keep both wheels going at least slightly forward.
17