Start-Up And Use; Setting The Clock; Setting The Minute Minder; Extralarge Space - SCHOLTES BC 99DT P XA Mode D'emploi

Start-up and use

! The first time you use your appliance, heat the empty
GB
oven with its door closed at its maximum temperature
for at least half an hour. Make sure that the room is
well ventilated before switching the oven off and
opening the oven door. The appliance may emit a
slightly unpleasant odour caused by protective
substances used during the manufacturing process
burning away.
! ! ! ! ! Never put objects directly on the bottom of the oven;
this will prevent the enamel coating from being
damaged.
! ! ! ! ! Always place cookware on the racks provided.
! ! ! ! ! During operation, we recommend the removal of any
crockery or delicate foodstuffs from the cavities not
being used.
! ! ! ! ! We recommend that you do not open the door when
cooking foodstuffs which require proving, so as to not
compromise cooking results.
! ! ! ! ! Once the cooking programme has begun, before
the DIVIDER is removed, the oven must be switched
off using the button.
Cooling ventilation
In order to reduce the external temperature of the
oven, a cooling fan generates a stream of air which
escapes underneath the oven control panel.
! ! ! ! ! Once cooking has been completed, the cooling fan
activates and deactivates automatically until the oven
has cooled down sufficiently.

Setting the clock

! This may only be set while the oven is switched off.
1. Press the button until the first numerical digit
flashes on the DISPLAY and the
are switched off.
2. Turn the SET TIME KNOB towards "+" and "-" to
adjust the hour value.
3. Press the button again so that the other two
numerical digits on the DISPLAY begin to flash.
4. Turn the SET TIME KNOB towards "+" and "-" to
adjust the minute value.
5. Press the button again to confirm.

Setting the minute minder

! It can only be set when the oven is switched off, and
only remains active while the oven is not in use. If any
of the oven functions are activated, all timer settings
will be lost. This function does not interrupt cooking
and does not affect the oven; it is simply used to
activate the buzzer when the set amount of time has
elapsed.
22
, and icons
1. Press the button until the
digits on the DISPLAY begin to flash.
2. Turn the SET TIME KNOB towards "+" and "-" to
adjust the minute value.
3. Press the button again to confirm.
The display will then show the time as it counts down.
When this period of time has elapsed the buzzer will
be activated.

ExtraLarge Space

Starting the oven
1. Select the desired cooking function by turning the
EXTRALARGE SPACE FUNCTION knob. If the
icon on the display is lit, this indicates that the
ExtraLarge Space has been selected and therefore
that only the settings corresponding to the ExtraLarge
Space may be used.
2. The oven will begin its preheating stage. The
temperature may be changed by turning the
TEMPERATURE knob. The
during the preheating stage.
3. Once the preheating stage is completed, the
icon stops flashing (becomes fixed) and a buzzer
sounds. Food may now be placed in the oven.
4. During cooking it is always possible to:
- change the cooking function by turning the
EXTRALARGE SPACE FUNCTION knob;
- adjust the temperature using the TEMPERATURE
knob (for the Creation cooking functions only);
- set a duration (for Creation cooking functions only)
and the cooking end time;
- stop cooking by turning the EXTRALARGE SPACE
FUNCTION knob to the "0" position.
5. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance
will reactivate the cooking function from the point at
which it was interrupted, as long as the temperature
has not dropped below a certain level. The clock
and programmed cooking modes which have not yet
started will not be restored and must be
reprogrammed.
! ! ! ! ! When using the oven in its ExtraLarge configuration,
it will not be possible to use the Main and Small Space
features: the SMALL SPACE and MAIN SPACE
FUNCTION knobs will be disabled.
Universal (Creation) cooking functions
! All functions have a default cooking temperature
which may be adjusted manually between 40°C and
250°C as desired.
icon and the three
indicator light flashes