Skandika Fitness ADRIA Instructions De Montage Et Mode D'emploi page 19

Step 4
FIx the rowing arms (19a and 19b) on the floor
pipes with screws (3), washers (12), bushings (21)
and nuts (13).
Step 5
FIx the free end of the hydraulic cylinder (25) on
the bracket (26) with one screw (22), one washer
(12) and one nut (13) on each side. The bracket
(26) then should be mounted at the respective ro-
wing arms with a washer (12) and the fixing knob
(27).
Step 6
Connect the computer cable (29) with the sensor
cable (28) as shown. Fix the computer with the vel-
cro pads on the main frame. Pay attention not to
squeeze any cable. Press the plastic caps (14) in
the front and rear openings of the main frame.
SET-UP
19