stayer TM800A Instructions D'emploi page 19

Important!
The vibration value changes according to the area of
application of the electric tool and may exceed the
specified value in exceptional circumstances.
5. Before starting the equipment
5.1. Fitting the additional handle (Fig. 2-3/Item 7)
5.2 Fitting and adjusting the depth stop
(Fig. 4/Item 2)
ENGLISH
5.3 Fitting the drill bit (Fig. 5-6)
The quick-change drill chuck (1) is equipped with
a locking fastener:
To lock = press the sleeve (a) forwards
To unlock = press the sleeve (a) backwards
6. Operation
6.1 ON/OFF switch (Fig. 7/Item 5)
To switch on:
Continuous operation:
To switch off:
6.2 Adjusting the speed (Fig. 7/Item 5)
19