stayer TM800A Instructions D'emploi page 18

Important!
1. Safety regulations
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1)
9. Gear Selection, Mechanical
3. Proper use
ENGLISH
4. Technical data
= Rated power input
= Load speed
rpm
= Percussion
ipm
= Diameter of drill
= Maximum drilling, steel
The values given are valid for nominal voltages [U] 230/240 V ~ 50/60
Hz - 110/120 V ~ 60Hz. For lower
countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary .
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Sound pressure level, L
Uncertainty K
pA
Sound power level L
Uncertainty K
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Hammer drilling into concrete (handle)
Vibration emission value a h = 13.192 m/s²
Uncertainty K = 1.5 m/s²
Hammer drilling in concrete (additional handle)
Vibration emission value a h = 4.503 m/s²
Uncertainty K = 1.5 m/s²
Drilling in metal (additional handle)
18
= Maximum drilling, stone
= Maximum drilling, wood
kg
= Weight
L = Sound power level
WA
L A = Sound pressure level
P
= Vibration
voltage and models for specific
99 dB(A)
pA
106 dB(A)
WA
(handle)
3 dB
3 dB