Initial Use; Installation - LIVARNO LUX 298692 Instructions De Montage, D'utilisation Et Consignes De Sécurité

Applique murale solaire à led
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

transport from the manufacturer to the retail location. Therefore,
please charge the rechargeable battery before the first use.
Slide the ON / OFF switch
Note: In constant sunlight (depending on the season) a drained
rechargeable battery should take two to ten days to charge.
Note: The built-in charging controller of the LED solar spotlight
prevents the rechargeable batteries from overcharging. Replace
the rechargeable battery if the light output does not improve after
charging (see "Replacing the rechargeable battery").

Initial use

Note: The solar cell
motion sensor
7
When selecting the setup location for the solar cell
that the solar cell, as well as the twilight sensor, is not affected
by other light sources, e.g. street lighting.
The "ON" position for the ON / OFF switch
the following functions:
If the orientation light is constantly lit up, it will automatically switch
on or off once the solar cell
long operating life, the LEDs will not be fully powered in this setting.
If the rechargeable battery is fully charged, the charge will be suffi-
cient for approx. 8 hours of lighting. As soon as the motion sensor
detects movement, the product will switch to particularly bright
7
light. While the particularly bright light is switched on, the LEDs
will be run at full power. Approx. 40 seconds after the last move-
ment has been detected, the product will return to functioning as a
constantly lit-up orientation light.

Installation

When selecting the mounting location, pay attention to the
following:
1. The solar cell
the solar cell surface will be directed to the south. The horizon-
tal direction of the solar cell is dependent on mounting on a
vertical wall.
2. Depending on the mounting height (ideally at 2 m) the sensor
has a detection range of max. 5 m with a detection angle of 90 °
horizontally and 90 ° vertically.
10 GB/IE/NI
11
also works as a twilight sensor, while the
6
only responds to movement.
detects dusk or dawn. To ensure a
6
requires direct sunlight when possible. Ideally,
6
to the ON position.
ensure
6
features
11
7

Publicité

Table des Matières
loading

Table des Matières