SOMFY Sonesse 28 WF Zigbee Li-ion Notice page 5

Sonesse 28 WF Zigbee Li-ion
2.3.2.Start-up
To set the drive, you need to access and use Set&Go Connect application, you must have a compatible phone or mobile
device and access to the internet.
The App is downloadable for free from Apple Store platforms and Google Play Store on the following mobile devices:
▪ Apple iPhone
®
mobile phone or mobile device with iOS operating system running iOS 11 and later.
▪ Mobile phone or mobile device with operating system Android
The software version of the Set&Go Connect application may be updated from time to time to add new features and
services.
2.3.3.Drive settings
▪ Once the Set&Go Connect application is downloaded, open the app and
follow the instructions to set the drive.
▪ Once the drive is set, check the settings by pressing the button on the motor
head:
◦ To start the motorised product movement, briefly press the button on the
motor head.
◦ To stop the motorised product movement, briefly press the button on the
motor head.
◦ To move the motorised product in the opposite direction of the previous
movement, briefly press the button on the motor head again.
◦ To stop the motorised product movement, briefly press the button on the
motor head, and so on.
2.3.4.Network management
NOTICE
Network status when the motor wakes up: The motorised product briefly moves up and down. If the orange LED blinks, it
is not linked to any network. If the LED doesn't light up and the motorised product briefly moves up and down, then it is linked
to a network.
To join a network:
▪ Follow the instructions on the Set&Go Connect application,
▪ Press and hold the motor head programming button until the product moves
up and down twice.
©
Copyright 2021 SOMFY ACTIVITES SA. All rights reserved.
™
OS 6.0 and later.
EN
5