Ptz Control - Eneo IPD-62M2812P0A Guide D'installation Rapide

(4)
Full Screen: Expand the current windows into maximum monitor size. Clicking
(5)
ESC button or right button on mouse to back to the normal view.
(6)
Custom: Move the control bar to make preferred window size.

PTZ Control

Used to adjust zoom/focus manually or one-push
focus automatically.
• Zoom: Adjusts camera image zoom in/out ratio
manually.
• Focus: Adjusts camera image focus manually.
• Push AF: When Push AF command is sent, camera
becomes Auto Focus mode to adjust focus position
for a while.
i
Note:
• This option is activated Motorized lens / AF- Zoom
lens model only.
• Enable lens locking after completing zoom/focus
setting.
[ Setup> Video&Image> Image> AF]
• Do not adjust zoom/focus at low light condition,
night mode. It might cause erroneous focusing.
EN
13