Installation Instructions - Eneo IPD-62M2812P0A Guide D'installation Rapide

Installation instructions

CAUTION: The camera's base should be attached to a structural
object, such as concrete, hard wood, wall stud or ceiling rafter
that supports the weight of the camera. If necessary use appro-
priate mounting material (e.g. anchors) instead of the material
enclosed with the camera.
1. Drill three holes for mounting on the ceiling or wall.
mounting screws.
3. Route the power/ethernet cable to the connecting place.
4. Place the dome base assembly to the Easy Adaptor.
5. Adjust the camera's viewing angle (Pan, Tilt, Rotation)
sticker from the lens.
7. Assemble the dome cover to the dome base unit.
Plastic Anchor (6x30mm)
Mounting Screw (3.5x25mm)
EN
7