Ezviz LC1C Guide De Démarrage Rapide page 10

Figure :Connect the Wires
Step 6
Snap the wire connector into place.
After securing the wires, snap the wire connector into the base of the mounting bracket.
Step 7
Place security light camera on the bracket.
Align the mounting posts with the holes on security light camera
and press together, securing the base screw caps.
Wires from your wall
Yellow-green-Ground
Brown-Hot
Blue-Neutral
Mounting Bracket
Step 8
Turn on power to your security light's circuit.
Base Screw
Cap
4
Connect to Matching Wire on Camera
Yellow-green
Brown
Blue
UP
Restore power at the breaker.
Wire Connector