Textron JACOBSEN G-Plex III Mode D'emploi page 8

4 OPS INSTALLATION
4.5 Locate Seat Belt Bracket (4133935) and
spacers (4133936) from the Seat Belt Kit
supplied within LMAC142.
Position components under the seat
tracks, and secure them into position,
existing hardware removed in step 4.2.
Spacers to be positioned under front
fastening to keep the seat level.
re-connect seat switch.
4.6 Assemble remaining Seat Belt fastenings
to bracket using Exploded Parts layout as
a guide.
4.7 Remove Hinges from G-Plex Machine,
which allows the Tank cradle to pivot.
Retain fasteners and lower portion of
Hinge.
4.8 Re-assemble hinges using new Hinge
Upper (4134553), and using existing pivot
bolt.
GB-6
JACOBSEN G-PLEX III
OPS FITTING INSTRUCTIONS