Chapter 1. General Description. Technical Characteristics - gala gar D-GPS Manuel Technique D'instructions

CHAPTER 1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.

These wire-feed units forms part of a modular system Gala Pulse Synergic (GPS) that permits electric
welding of carbon steels, slightly alloyed steels, stainless steels and aluminium, which are the most commonly
used metals in modern industry, by means of the MIG-MAG semiautomatic procedure.
The reading of this manual must be completed with the reading of the instructions manuals corresponding
to the GPS power source and to the WCS cooling module.
Standard equipment supplied with:
- Transport system. Wheels mounted bracket
- 2 Drive rollers. Ref. 42316122 D.37B/1.0-1.2MM (V-groove for normal and stainless steels)
- 2 Drive rollers. Ref. 42316127 D.37B/1.0-1.2MM (U-grove for aluminum)
- Instruction Manual Ref. 66017045
Elements Recommended accessories:
- Drive rollers: See Annexes and repair.
- GP Welding Torch: See instruction manual for power source.
D-GPS.Wire Feeder
Basic technical characteristics
TECHNICAL CHARACTERISTICS
Control connection.
Maximum input intensity I1max
No. of geared driving rollers
Applicable wire diameters (mm.)
Wire reels
Driving motor
Maximum wire speed (m/min.)
Speed control
Maximum welding intensity I2max.
Rated welding intensity I2 100%
Torch cooling circuit
Adjustment system
Bleed wire
Bleed gas
Welding connector
Weight
General dimensions
274
260
330
D-GPS
Ref.66000000
TELENET
5 A
4 x Ø37mm
UP to Ø2.0mm.
Ø300 mm; 15 kg
42 V(DC); 100W
24 m/min.
Encoder
450 A/60%
350 A/100%
YES
UNIVERSAL CONTROL
YES
YES
2
50-70mm
22 Kg.
625
9