Chapter 1. General Description Technical Characteristics - gala gar GALA 2000 CEL G.E. Manuel Technique D'instructions

1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
The GALA 2000 CEL G.E. is single-phase equipment with electronic technology (INVERTER) designed for use
as direct current source for cellulose and coated electrode welding, as well as DC TIG and DC PULSED TIG
processes. Its descending characteristic allows for excellent arc stability both in the TIG welding process and in
electrode. Especially indicated for welding with cellulose electrode. The use of this technology has led to
obtaining a lightweight and high performances equipment. These equipments have a protection system, which
means they can be installed, without any danger of failures, in low quality supply networks and electrical
generating sets.
GALA 2000 CEL G.E. Technical characteristics. Data according to standard EN 60974-1
Supply voltage (U
Maximum primary intensity (I
Effective input intensity (I
Protection against connection at 400V
Suitable for generating set.
No-load voltage (U
Continuous adjustment margin. (I
Maximum welding intensity I
M.M.A.
Rated welding intensity X%=100% (I
MMA Mode with Arc Force, Antisticking and Hot Start
MMA CEL Mode (Cellulose electrode)
Reduced no-load voltage in TIG mode (Ur)
Maximum welding intensity I
Rated welding intensity X%=100% (I
T.I.G.
Lift arc TIG mode without gas control
Pulsed TIG mode without gas control
Controlled ventilation (speed reduction)
Welding cable connectors
Mechanical protection degree IP
Thermal insulation grade.
Dimensions W x H x L (mm)
Weight (kg).
1.1 ACCESSORIES.
REFERENCE DESCRIPTION
002.59.040 Box of complete accessories for electrode welding.
811.113 Electronic protection shield (Automatic) BS-112
376.00.000 Argon pressure reducing valve – Mod. EN 2
376.00.515 Argon pressure reducing valve with rotameter – Mod. EN 2
006.281 TIG welding torch – Mod. SR 17V (4 m) and manual valve
006.294 TIG welding torch – Mod. SR 17V (8 m) and manual valve
USE ONLY THE RECOMMENDED SPARE PARTS AND ACCESSORIES.
Technical characteristics Technical characteristics
Technical characteristics Technical characteristics
– 1Ph. 50/60 Hz)
1
)
1max
)
1eff
)
2o
NEVER USE THESE WELDING MACHINES TO DEFROST TUBES.
GALA GAR has a complete range of welding accessories where you can find those most
suited to your needs.
GALA 2000 CEL G.E.
- I )
2min 2max
/Duty cycle. (40º C)
2max
) (40º C)
2n
/Duty cycle. (40º C)
2max
) (40º C)
2n
GALA 2000 CEL
G.E.
Ref.: 503.84.000
230 V ± 15%
45 A
26 A
•
•
92 V
5÷200 A
200 A/ 35 %
120 A
•
•
10.5 V
200 A/ 35 %
130 A
•
•
•
35-50
IP21
H
161x289x445
9,8 Kg
10