Audio Signal Tones - Motorola Cleartone CM5000 Guide De Référence

Audio Signal Tones

= High Tone;
Description
Idle
• Back to Home display
• Back to coverage
• Back to full service
Clear-to-send
Bad key press
• Good key press
• CM5000 self-test fails at
power up
• From out-of-service to in-
service
In Call
Call clear warning
Call waiting tone while
Phone or Private Call are
pending.
Data connected or
Data disconnected
Talk permit sounds upon
pressing the PTT.
Talk permit without
gateway sounds upon
pressing PTT. The tone
indicates the gateway is no
longer available.
• Talk prohibit
• System busy
• Time-out timer expire
• Called CM5000 not avail-
able or busy
• Call disconnected or
failed due to network
• Wrong number dialed
DMO (Direct Mode)
Entering
8
= Low Tone;
Type Repeated
Once
Once
Once
Once
Once
Every 6 seconds, until
a call is terminated.
Once
Once (Normal Tone)
Once (Short Tone)
Twice
Once
Until you release the
PTT.
Once
Once