Storage - SilverCrest SHBS 3.7 C1 Mode D'emploi

1. Remove the shaving attachment 3.
2. Press the button on the side of the shaving attachment and
remove the shaving foil frame. While removing the shaving
foil frame, only hold it at the side and do not press against
the shaving foil.
3. Clean the cutting blade using the included cleaning
brush 17.
4. Clean the shaving foil in the shaving foil frame under run-
ning water and allow it to dry completely before putting it
back on the shaving attachment 3.
5. Put the shaving foil frame back onto the shaving attach-
ment 3. While attaching the frame, make sure that the fasten-
ing tabs on the shaving foil frame fit into the appropriate
recesses on the shaving attachment, and press the shaving foil
frame gently downwards until it audibly locks into place.

8. Storage

• For storage ...
... put the hair and beard trimmer 5 in the battery charg-
er 11 or
... use the included storage bag 19.
46
GB