Troubleshooting - SilverCrest SHBS 3.7 C1 Mode D'emploi

11. Troubleshooting

If your device fails to function as required, please try this checklist
first. Perhaps there is only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device yourself under any cir-
cumstances.
Fault
No function
The cutting attachments 13,
3, 4, 12, 14 are not run-
ning smoothly
Possible causes / Action
• Has the device been connected
to the power supply?
• Is the battery empty?
• Have the attachments been
cleaned, and oiled if neces-
sary?
49
GB