Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en
^ Open the filter frame and use one of
the two clean corners to remove the
used Air Clean filter.
^ Insert a new Air Clean filter.
If you wish to replace the Air Clean
filter with an Active Air Clean filter or
Active HEPA filter see "Maintenance
and care - Exchanging exhaust
filters".
^ Close the filter frame and insert it
back into the compartment.
^ Close the exhaust filter compartment
lid.
Replacing the "Active Air Clean"
filter and the "Active HEPA"filter
(see fig. 32 + 33)
Do not use more than one filter at a
time.
^ Open the exhaust filter compartment
lid.
^ Remove the exhaust filter.
^ Insert a new exhaust filter.
^ Close the exhaust filter compartment
lid.
If you wish to use an Air Clean filter
see "Exchanging exhaust filters".
Resetting the exhaust filter change
indicator (see fig. 28)
If your vacuum cleaner has a reset
button, it must be pressed each time
the exhaust filter is changed.
^ Turn the vacuum on.
16
^ Press and hold the reset button until
the "Exhaust filter change indicator"
indicator goes out.
The indicator is only reset if pressed
while lit. If the indicator is pressed
before it lights it will not be reset.
Exchanging exhaust filters
Depending on the model, your vacuum
cleaner will use one of the following
standard exhaust filters (see fig. 27):
a Air Clean
b Active Air Clean (black)
c Active HEPA (blue)
If you wish, you can use one of the
alternative filters instead of the
standard filter supplied with your
appliance. Each filter offers different
characteristics (see section "Optional
accessories").
Important
1. If you replace exhaust filter a with
exhaust filter b or c, you must be sure
to remove the filter frame before
inserting the new filter type.
2. If you replace exhaust filter b or c
with exhaust filter a, be sure to place
the new filter in a filter frame *
(see fig. 30).
Do not use more than one filter at a
time.
* Filter frame - see "Optional accessories"
Publicité
Chapitres
Table des Matières
