Replacing The "Air Clean" Filter; Replacing The "Activeairclean 50" Filter And The "Hepa Airclean 50" Filter; Exchanging Exhaust Filters - Miele S 6000 Instructions D'utilisation

en
b ActiveAirClean 50 Filter (black)
c HEPA AirClean 50 Filter (white)
If the display of the exhaust filter
change indicator has turned fully red
(see fig. 15).
The indicator light will come on after
approx. 50 hours of operation, which is
equivalent to one year of average use.
The vacuum cleaner can still be used
however, the filter performance and
suction power will be reduced.
Replacing the "Air Clean" filter (see
fig. 31 + 32)
Do not use more than one filter at a
time.
^ Open the dust compartment lid.
^ Squeeze the release for the filter
frame and open until it clicks.
^ Grasp one of the two clean corners
(see arrow) to remove the used Air
Clean exhaust filter.
^ Insert the new filter.
If you wish to replace the Air Clean
filter with an ActiveAirClean 50 filter
or HEPA AirClean 50 filter see
"Maintenance and care -

Exchanging exhaust filters".

^ Close the dust compartment lid firmly
until it clicks into place.
16
Replacing the "ActiveAirClean 50"
filter and the "HEPA AirClean 50"
filter (see fig. 33 + 34)
Do not use more than one filter at a
time.
^ Open the dust compartment lid.
^ Remove the exhaust filter.
^ Insert the new filter.
^ Press the exhaust filter change
indicator ~ (see fig. 13).
^ After about 10-15 seconds, a small
red marker will appear in the left-hand
side of the display (see fig. 14).
If you wish to replace the
ActiveAirClean 50 filter or the Hepa
AirClean 50 filter with an Air Clean
filter see "Maintenance and care -
Exchanging exhaust filters".
^ Close the dust compartment lid firmly
until it clicks into place.
Exchanging exhaust filters
1. If you wish to replace the a Air Clean
filter with the b ActiveAirClean 50 filter
or the c HEPA AirClean 50 filter, you
must remove the filter frame before
inserting the new filter (see fig. 34).
The exhaust filter change indicator
must also be activated (see fig. 13).
2. If you use an Air Clean filter a you
must insert it into a filter frame (see fig.
32), see "Optional accessories".
Do not use more than one filter at a
time.