Safety Regulations - Ammann ABS 68 Instructions De Service

1. Safety regulations

This Ammann machine has been designed and constructed in
conformance with current standards and directives.
machine can constitute a danger to persons and property
however if:
•
It is not used for the intended purpose
•
It is not operated by trained personnel
•
It is incorrectly modified or converted
•
The safety requirements are not observed
For this reason, all persons concerned with operation,
maintenance and repair of the machine must read and
follow the safety requirements.
confirmed with respect to the user company by signature.
The following also apply:
•
The pertinent regulations for the prevention of accidents
•
Generally recognised safety rules and road traffic regulations
•
Country-specific requirements
Intended use
This machine is only intended for:
•
The compaction of all types of surfaces
•
Repairs to all types of surfaces
•
Stabilisation of pavements and roads
•
Working in trenches
•
Underfilling and compaction of verges
Improper use
The machine can constitute a hazard if used improperly by
untrained persons or not for the intended purpose.
For example:
•
Working in horizontal direction
•
Pile driving
•
Compaction of verges
Who is allowed to operate the machine?
Only trained, instructed and authorised persons over the age of
18 may operate the machine. The responsibilities must be
clearly defined and observed prior to operation of the machine.
Persons who are under the influence of alcohol, medicines or
drugs must not operate, maintain or repair the machine.
Maintenance and repairs require specific knowledge and must
only be carried out by trained specialists.
Conversions and changes to the machine
Unauthorised changes to the machine are not permitted for
safety reasons.
Original parts and accessories have been specially designed for
the machine. It should be noted that parts and special
equipment not supplied by us are not approved by us. The
installation and/or the use of such products can also affect the
active and/or passive safety.
The manufacturer disclaims all liability for any damage caused
by using non-original parts or special equipment.
This
This may have to be
20
Safety information contained in the operating and
maintenance instructions
The following terms and symbols are used in this operating
manual that draw attention to important information:
Refers to special information on how to use the machine
most efficiently.
Important .
Refers to special information and/or orders and
prohibitions directed towards preventing damage
Attention
Refers to orders and prohibitions designed to
prevent injury or extensive damage.
Danger
Loading the machine
Secure the machine to prevent it tilting or slipping.
A risk to life exists if persons walk or stand under suspended
loads.
It should be noted that the machine may swing when suspended.
Secure the machine on transport vehicles to prevent it rolling,
slipping or tilting.
Starting the machine
Before starting the machine
Familiarise yourself with the operating and control elements and
mode of operation of the machine and the working area.
Use personal protective equipment (protective helmet, safety
shoes, etc.)
Use hearing protection.
Before starting the machine, check whether:
•
The machine has any noticeable defects
•
All protective devices are securely in place
•
The control elements function
•
The machine is free from oily and ignitable material
•
All handles are free from grease, oils, fuels, dirt, snow and ice.
Only use machines that have been regularly maintained.
Starting in enclosed areas
Exhaust fumes are dangerous! Before starting the machine in
enclosed areas, sufficient ventilation must be ensured!
Operation
Guide the machine so that hands do not come against fixed
objects; risk of injury.
Listen for any abnormal noise and smoke. Locate the cause and
have the damaged repaired.
Do not hold the throttle below I, as this can damage the
centrifugal clutch.
Never release the machine with the engine running.
Keep feet away from the tamping base plate
Parking the machine
If possible, park the machine on a level, firm surface.
Before leaving the machine:
Secure the machine to prevent it tilting.