Retrofitting A Seuthe Steam Generator - Roco BR 23 DB Serie Manuel

▪

Retrofitting a Seuthe steam generator

1.
First remove the chimney hood and then install the Seuthe steam generator no. 10
(for analogue DC operation) or no. 11 (for digital DC operation).
When dealing with a steam generator installed in digital mode complete with a
3.
2.
retrofitted 10880 decoder, it is possible to switch the steam generator on and off
via the F1 key.
Functions when operated with bridge plugs (= analogue operation):
– Light white (dependent upon direction of travel)
– Seuthe 10 smoke generator (if retrofitted)
Functions when operating with a retrofitted 10880 decoder (= digital operation)
F0 = Light white (dependent upon direction of travel)
F1 = Seuthe 11 smoke generator (if retrofitted)
31
73018-920 ETBA neues Design flach DBBR 23 002.indd 31 29.04.2019 08:37:39