2.2
SPECIFICATIONS
Adjustable Flashing
Electrical Rating
Watts During Ignition Sequence
Watts During Operation
Weight
Exhaust Collar
Intake Collar
Hopper Capacity
Burn Rate
BTU/Hr
Approximate Maximum Heating Capacity (in square feet)* 800 to 2000 Sq. Feet / 74 to 186 Sq. Meters
Maximum Burn Time on Low Burn**
* Heating capacity will vary depending on the home's fl oor plan, degree of insulation, and the outside temperature. It is
also affected by the fuel size, quality, and moisture level.
** Small pellets will increase or decrease the stated burn rates and burn times. Differences of plus or minus 20%
depending on fuel quality may occur.
2.3
GENERAL INSTRUCTIONS
ALL WIRING SHOULD BE DONE BY A QUALIFIED ELECTRICIAN AND SHALL BE IN COMPLIANCE
WITH LOCAL CODES. IN THE ABSENCE OF LOCAL CODES, USE THE CURRENT CSA C22.1
CANADIAN ELECTRIC CODE (IN CANADA) OR THE ANSI/NFPA NO. 70 NATIONAL ELECTRIC CODE
DO NOT CONNECT THIS APPLIANCE TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE. DO
NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM.
PROVIDE ADEQUATE CLEARANCE FOR SERVICING AND OPERATING THE APPLIANCE.
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
OBJECTS PLACED IN FRONT OF THE APPLIANCE MUST BE KEPT A MINIMUM OF 48" (1219.2mm)
115 Volts, 3.6 Amps, 60Hz
400 (approximately)
180 (approximately)
Stove 158 lbs (1003kg) / Insert 140 lbs (889kg)
3" (76mm)
2" (51mm)
45 Pounds (20kg)
1.5 to 4.5 (Pounds Per Hour) / 0.7 to 2 (Kilograms Per Hour)
12750 to 38250
30 Hours
WARNING
!
IN THE UNITED STATES.
PROVIDE ADEQUATE VENTILATION.
FROM THE FRONT FACE OF THE APPLIANCE.
A
11" (279mm) to
13" (330mm)
7
B
10 1/2" (267mm) to
12 1/2" (317mm)
W415-1477 / A / 10.19.16
EN