Service Menu - Kostrzewa Platinum Bio ecoMAX860P3-O TOUCH Manuel D'instruction

14. Service menu

80
14. Service menu
Access to the menu is password protected.
Service settings
Burner settings
Boiler settings
CH and DHW settings
Buffer tank settings*
Mixing valve 1-5 settings*
H output
Restore default settings
Restore default settings
Touch panel calibration
Burner settings
Startup
Heating time
Startup fuel batch
Flame detection
Startup blow-in
Startup time
Operation
Maximum burner power
Maximum FL burner power
FL burner minimum power
Blow-in settings:
· Blow-in nominal power
· Oxygen nominal power*
· Blow-in intermediate power
· Oxygen intermediate power*
· Blow-in minimum power
· Oxygen minimum power*
OPERATION mode cycle time
Monitoring time
Feeder output
Fuel calorific value
Operation with oxygen sensor*
Cleaning
Linear actuator extended
Linear actuator retracted
Ash removal time*
Heat exchanger cleaning time*
Heating and ventilation
Variable grate geometry
Control
Actuator at nominal power
Actuator at minimum power
Cleaning - interval
Cleaning - movement
Grate - wood
Maximum startup time
Blow-in operation - monitoring
Blow-in idle time - monitoring
No fuel detection time
Storage bin settings
Storage bin volume
Fuel level sensor
Minimum fuel level
Feeder
Output test time
Feeder output test
Fuel weight
* not available if no sensor or additional module is installed
or the parameter is hidden.
Boiler settings
OPERATION MODE
Return protection
· 4D return protection
· Return hysteresis
· Minimum return temperature
· Valve closing
Maximum boiler temperature
Select thermostat
Boiler hysteresis
Pump disabled by thermostat
ON / OFF
OFF
OFF
Platinum Bio ecoMAX 860P User Manual – EN 07.22
ON / OFF