Technical Specifications - SPARKY PMB 1200CE Notice Originale

Technical specifications

Model
Power input
Rated speed
Flexible backing pad
Operating tool
Spindle thread
Spindle thread length
Weight (EPTA Procedure 01/2014)
Safety class (EN 60745-1)
NOISE AND VIBRATION INfORMATION
Measured values determined according to EN 60745.
Noise emission
А-weighted sound pressure level L
Uncertainty К
pA
А-weighted sound power level L
Uncertainty К
wA
Wear hearing protection!
Vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Sanding metal surfaces with sandpaper
Vibration emission value a
Uncertainty К
DS
Polishing painted surfaces with felt wheel
Vibration emission value a
Uncertainty К
* The vibration emission values are determined according to 6.2.7 EN 60745.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool
is used for different applications, with different accessories or poorly maintained, the vibration emis-
sion may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce
the harmful effect of vibrations.
Other applications such as wire brushing may have different vibration emission values.
Dust from material such as paint containing lead, some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory dis-
eases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chromate, wood preservative). Material containing asbestos
must only be treated by specialists.
▪ Where the use of a dust extraction device is possible it shall be used.
▪ The work place must be well ventilated.
▪ The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
The machine is equipped with electronic device for soft start and restriction of starting current to
16 A.
Original instructions
pA
wA
h,DS
h
PMB 1200CE
1200 W
600-2800 min
-1
Ømax 175 mm
Ømax.180 mm
M14
20 mm
2,9 kg
II
91 dB(A))
3,0 dB(A)
102 dB(A)
3,0 dB(A)
4,1 m/s
2
1,5 m/s
2
2,7 m/s
2
1,5 m/s
2
3
EN