WERTHER INTERNATIONAL TITANIUM 100/22 Notice D'instructions page 36

32
CHAP.7 TROUBLE-SHOOTING
TROUBLE: POSSIBLE
CAUSE:
Turntable rotates
Reverser broken
only in one direc-
tion.
Turntable does not
Belt broken
rotate
Reverser broken
Problem with motor
Belt loose
Turntable locks
Clamp slow to open
or close Silencer clogged
Turntable does not
lock the wheel rim Clamps worn
correctly
Turntable cylin-
der(s) defective
Locking plate incor-
The tool touches
rectly adjusted or
the rim during the
defective
tire removing or
mounting opera-
Turntable locking
tions
screw loose
Pedal lock out of
Return spring bro-
working position
ken
Bead breaking ope-
Silencer clogged
ration difficult
Bead breaker cylin-
der gasket broken
SOLUTION:
Replace reverser
Replace
Replace reverser
Check for loose
wire in the motor,
plug or socket.
Replace motor
Adjust the belt ten-
sion (chap. 7 fig.24)
Clean or replace si-
lencer
Replace clamps
Replace cylinder
gasket
Adjust or replace
locking plate(chap 7
– Fig 25)
Tighten screw
Replace spring
Clean or replace si-
lencer (chap
7-FIG.7)
Replace gasket