Single Band Generator Operation Mode - Promax RP-250 Manuel

USER'S MANUAL. RP-250
In order to quit the MEMS function and back to the generator press BACK [F5]
option in the lower selection frame.

4.2.2.4 Single band generator operation mode

The equipment can work as a single band generator, in the range from 2500.00
to 5.00 MHz.
Select this operation mode, through the instrument configuration mode:
CONFIG [F1] (see section "4.2.1 Configuration of internal parameters (CONFIG)")
select the PILOTS option in the configuration menu, next by means of the navigation
buttons [7] select the pilot mode = 1.
Page 21
Figure 13.- Erasing a stored configuration.
03-2007