Télécharger Imprimer la page

SOUNDMASTER PL196H Mode D'emploi page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
CONNECTION
Connect the power cord to AC outlet.
Now your system is ready to play the music.
MANUAL TUNING
➢ Set the function switch to the position "TUNER".
➢ Tune to the required station by turning the tuning knob.
➢ Adjust the "VOLUME" knob to the desired volume level.
➢ Set the FM mode selector to „FM" position. Programs are received in mono mode. In
particular when stereo signals are weak. It's preferable to receive the program in mono
➢ Set the FM mode selector to "FM-ST" position for receiving stereo programs. The LED "ST"
indicator will light up to show FM stereo program is receiving.
NOTE:
➢ Remove the stylus protector.
➢ Be sure that the tone arm is being detached from the rest
before operating and re-secured again afterwards.
1. Select the "PHONO" function.
2. Set the speed selector to the proper position depending on the record be played.
3. Place the record on the platter (Use the spindle adaptor if required).
4. Lift the tone arm from the rest and slowly move it to the record side.
The platter will start to rotate
5. Place the tone arm to the desired position of the record
6. Adjust the volume to the desired level
7. At the end of record, the platter will automatically stop rotating. Lift the
tone arm from the record and return it to the rest
8. To stop manually, lift the tone arm from the record and return it to the rest.
REMARK: As some kind of record the auto-stop area was out of the unit setting, so it will stop
before the last rack finish. In this case, select the auto-stop switch to " off " position, then it will
run to the end of the record but will not stop automatically (turn off the unit by power button or
switch back the auto-stop switch to " on " position to stop the platter rotate). Then put back the
tone arm to the rest position.
You can connect the system to your whole hi-fi system by connecting the line out socket to the
auxiliary input socket with a RCA cable (not included).
REMARK: the sound from the original build-in speaker will not be terminated even after
connecting to other hi-fi system via line out socket. You can turn the volume of system to
minimum level if you prefer the sound coming from the hi-fi system only.
LISTENING TO RADIO
PHONO
LINE OUT CONNECTION
2
PL196H / English instruction manual

Publicité

loading