Publicité
Les langues disponibles
Les langues disponibles
EN
4
DELIVERY AND STORAGE
Radiant panels are supplied on wooden pallets with
cardboard separators to prevent damage.
Upon receipt, make sure that the material is intact
and corresponds to the supply.
The vehicle unloading operations are the responsi-
bility of the recipient.
To prevent the separators from staining the painted
surface of the panel, avoid storing the material out-
side, exposed to the elements (rain and/or fog).
The panels must in any case be stored in a dry place
away from the elements.
5
HANDLING
Panels must be handled by at least two people.
18
5
mt
6
PRODUCT IDENTIFICATION
Each panel features an identification label indicating
the manufacturer's details and the relative model.
The DS Sabiana series is CE marked in compliance
with European Standard EN 14037-1.
7
DISPOSAL
Consumables and replaced parts should be disposed
of safely and in accordance with the environmental
protection legislation.
The person performing installation and maintenance
throughout the entire service life of the device must
carefully follow the instructions below and comply
with the following requirements:
The packaging consists of recyclable materials such
as cardboard and polystyrene (EPS). Also the paper
instructions, bags and protective polythene sheets
(PE) are made with recyclable material.
If the system has antifreeze liquid added to it, the
latter must not be discharged freely, because it is
a polluting substance and it must be collected and
suitably disposed of; oil, grease, detergents, solvents
and paint residues must be disposed of in accord-
ance with current laws and regulations.
The materials resulting from dismantling the appli-
ances must be separated and disposed of in author-
ised collection centres in accordance with the laws
and regulations in force.
Insulation material is considered as non-hazardous
waste; it must be removed and disposed of in author-
ised collection centres in accordance with the laws
and regulations in force.
Publicité
