EEWH311A Tire Changer Operation Manual
Risk of crushing. Stand clear of bead breaker arm during operation.
• • • • • Read and understand the operation instructions before using this
Warning !
tire changer.
• • • • • Become familiar with all controls before proceeding with operation.
• • • • • Stand away from the bead breaker arm when in operation.
• • • • • Apply air to breaker in bursts if necessary to control arm depth.
• • • • • Keep all persons clear of tire changer.
Contact with moving parts could cause injury.
Risk of pinching or crushing hands and fingers when mounting and demounting.
• • • • • Read and understand the operation instructions before using this
Warning !
tire changer.
• • • • • Keep hands and fingers clear of rim edge during demounting and
mounting process.
• • • • • Keep hands and fingers clear of mount/demount head during opera-
• • • • • Keep hands and other body parts away from moving surfaces.
• • • • • Do not use tools other than those supplied with tire changer.
• • • • • Do not bypass any safety features.
• • • • • Use proper tire lubricant to prevent tire binding.
Contact with moving parts could cause injury.
Risk of eye injury. Flying debris, dirt, and fluids may be discharged during bead
seating and inflation process.
• • • • • Remove any debris from tire tread and wheel surfaces.
• • • • • Remove excess tire lubricant before inflating.
• • • • • Wear approved safety glasses during mount and demount
Debris, dirt, and fluids can cause serious eye injury.
Risk of injury. Tools may break or slip if improperly used or maintained.
• • • • • Read and understand the operation instructions before using this
tire changer.
• • • • • Use only the mount/demount tire tool supplied with the tire changer.
• • • • • Frequently inspect, clean, and lubricate (if recommended) where
• • • • • Follow procedures when instructed in this manual.
Tools that break or slip can cause injury.
IMPORTANT !! SAVE THESE INSTRUCTIONS — DO NOT DISCARD !!
Operation Manual
tion.
procedures.
designated.
®
Page 7