Snap-On EEWH311A Instructions D'opération page 5

EEWH311A Tire Changer Operation Manual
The EEWH311A Tire Changer is intended for use by properly trained automotive
technicians. The safety messages presented in this section and throughout the manual
are reminders to the operator to exercise extreme care when changing tires with these
products.
There are many variations in procedures, techniques, tools, and parts for changing
tires, as well as the skill of the individual doing the work. Because of the vast number
of wheel and tire applications and potential uses of the product, the manufacturer
cannot possibly anticipate or provide advice or safety messages to cover every situation.
It is the automotive technician's responsibility to be knowledgeable of the wheels and
tires being changed. It is essential to use proper service methods and change tires in
an appropriate and acceptable manner that does not endanger your safety, the safety
of others in the work area or the equipment or vehicle being serviced.
It is assumed that, prior to using the EEWH311A Tire Changer, the operator has a
thorough understanding of the wheels and tires being changed. In addition, it is assumed
he has a thorough knowledge of the operation and safety features of the rack, lift, or
floor jack being utilized, and has the proper hand and power tools necessary to service
the vehicle in a safe manner.
Before using the EEWH311A Tire Changer, always refer to and follow the safety
messages and service procedures provided by the manufacturers of the equipment
being used and the vehicle being serviced.
Operation Manual
SAFETY INFORMATION
For your safety, read this manual thoroughly
before operating the EEWH311A Tire Changer
SAVE THESE INSTRUCTIONS - DO NOT DISCARD !!
IMPORTANT !!
®
Page 5