Controls - Snap-On EEWH311A Instructions D'opération

EEWH311A Tire Changer Operation Manual
3.0

CONTROLS

Figure 3.0-1
Before operating the machine, take the time to
familiarize yourself with the operation and function of
all the controls (Figure 3.0-1).
15:
A Press down and release, the first pedal from
the left: the column tilts backwards.
Do it again: the column tilts forward.
B Press down and release the second pedal from
the left: the jaws of the turntable will retract. Do it
again: the jaws will expand. If you press the pedal
Operation Manual
prior to the end of the stroke and release, the jaws
may be stopped in any position.
C Press down and hold, the second pedal from the
right: the turntable turns clockwise.
1. 3/4 down approximately, the turntable rotates
at the minimum speed (8 rpm approx.). The torque
is maximum in this condition.
2. All the way down the turntable rotates at the
maximum speed (14 rpm approx.).
Lift the pedal and the turntable turns counter-
clockwise.
D Open the bead breaker arm. Press down and
hold, the first pedal from the right: by doing this
you operate the bead breaker blade and the arm
will move towards the machine. Release the pedal:
the bead breaker blade will retract.
1102
442 441
Page 15
®