Mounting And Demounting Motorcycles Tyres - Snap-On EEWH311A Instructions D'opération

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

®
When working to loosen a stubborn lower bead simply
swing the bottom bead roller under the lower sidewall
and apply slow upward pressure. Be careful not to
mistakenly swing far enough in to contact the rim.
When working to safely secure the second bead for
removal, insert the tire tool all the way past first and
second bead. Now swing the bottom bead roller into
position under the lower sidewall and lift. As the sidewall
comes up, so will the tire bar easily flipping onto the
mount/demount head.
Page 26
EEWH311A Tire Changer Operation Manual
5.4 MOUNTING AND DEMOUNTING MOTORCYCLE
TIRES
To mount and demount motorcycle/ ATV or motor-
scoter wheels it is necessary to utilize the 8" motorcycle
jaws (part number EAA0304G34A).
The bead-breaking, mounting and demounting
technique is the same as per the car, tubeless or tube-
type tires.
NOTICE!
MOTORCYCLE RIMS MUST ALWAYS BE CLAMPED
FROM THE OUTSIDE. AIR PRESSURE MUST NOT
EXCEED 110 PSI (8 BAR) WHEN CLAMPING
MOTORCYCLE RIMS.
Operation Manual

Publicité

Chapitres

Table des Matières
loading

Table des Matières