Cooke & Lewis CLIND60ERF Mode D'emploi page 6

Les langues disponibles

• You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces

surrounding the hob.

• The power supply cable is not accessible through cupboard doors or drawers.

• There is adequate flow of fresh air from outside the cabinetry to the base of the hob.

• If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed

below the base of the hob.

• The isolating switch is easily accessible by the customer.

• The hob should be fixed into the worktop using the fixing brackets and sealing tape supplied with

the appliance. Do not use silicone sealant or PVA to secure the hob. Doing so will prevent an

engineer removing the appliance to facilitate a repair.

202161_s1_s1_CLIND60ERF_SM_Cooke & Lewis_A5_IM_Multi_V03.indd 5

12-05-2020 12:17:29

5059340093833 5059340093840