How Do I Load Paper Using The Front Path; How Do I Unload Paper From The Front Path - HP Designjet 110 plus Guide De Référence Rapide

HP Designjet 110plus/110 plus nr printer—

How do I load paper using the front path?

1. Place a single sheet of paper in the output tray, aligning it on the right of the
output tray, with the side that is to be printed on facing down. Do not stack
multiple sheets here.
2. Push the paper as far as it will go into the printer, maintaining its alignment to
the right.
3. Press the OK key (the upper right key) on the front panel.
The printer will check the alignment of the paper, and if it is misaligned, it will eject
the paper; in that case you will have to reload the paper.

How do I unload paper from the front path?

In case you want to change or remove the paper that you have loaded before
printing, for example to change the type of paper or to use a different input path:
• Press the Cancel and OK keys at the same time, to eject the paper.
Quick Reference Guide
3