Emptying the fluid container
Switch off the appliance and remove
the plug from the socket.
Drive the appliance to the disposal site
for the liquid.
Disconnect the drain hose at the upper
hose coupling.
Hold the drain hose over a suitable col-
lection unit and drain the content.
Dispose of the contents according to
the local provisions.
Tilting the container
Illustration on the inside of the front
cover
Switch off the appliance and remove
the plug from the socket.
Drive the appliance to the disposal site
for the liquid.
Illustration
Open the lock of the suction head.
Remove the suction head and put
aside.
Illustration
Remove the drum pump from the stand-
pipe.
Illustration
Open the lock (foot rest).
Illustration
Tilt the container with the push handle.
Dispose of the contents according to
the local provisions.
Fit and lock the suction head again.
Reinsert the drum pump.
10
manually
Clean the container
Note: Water based cooling lubricants can
cause a bacterial contamination. Wear ap-
propriate protective gear during the remov-
al.
Empty the container.
Remove deposits from the container.
Dispose of deposits in accordance with
the applicable regulations.
Free the retaining plates from chips and
deposits.
Shutting down
Switch off the appliance using the On/
Off switch.
Empty and clean the container.
Clean drum pump.
Dismantle the accessory and rinse it
with water and let dry if necessary.
Note: Empty the vacuum cleaner after
each use and let it dry with the container
open.
– 5
EN