Maintenance And Cleaning - Conrad 98 69 22 Notice D'emploi

• First click „Save/Reload Settings" and then the button „Reset".
• A small window will appear that
you have to confi rm by clicking
„OK".
• During resetting, all LEDs except for the Power LED will go out briefl y.
The repeater now restarts. This will table take about 1 minutes. Then the device is reset to
factory settings.

15. Maintenance and Cleaning

Servicing or repair must only be carried out by a specialist or specialist workshop. The product
contains no parts that require servicing by you. Therefore, do not open it.
A dry, soft and clean cloth is suffi cient for cleaning the outside.
☞
Never use any aggressive cleaning agents, alcohol or other chemical solutions that
would damage the casing (discolouration).
51