Conrad 98 69 22 Notice D'emploi page 42

• The repeater performs its restart now and then automatically connects to your WLAN router
again.
To test the settings, close the web interface and restart your computer. If your router is con-
nected to the internet, internal access should be possible on your computer as well now.
☞
Observe:
After confi guration, access to the web interface with the regular method is no longer
possible.
To still access the web interface, you need to assign a fi xed IP to the network con-
nection of your computer.
Another way would be assigning an IP address in the area of your WLAN router to
the repeater before confi guration. For this, observe chapter 12 of these instructions.
• Confi guration is now complete.
• You need to connect your computer to your router as usual via WLAN.
Access to the repeater will be automatic, depending on whether your are closer to the router
or the repeater.
• Now continue with chapter 13 to place the repeater correctly.
☞
If any problems occur, perform a reset as described in chapter 14 and start confi gu-
ration again.
Particularly observe that you correctly enter the WLAN password.
42