Commissioning - Conrad 98 69 22 Notice D'emploi

7. Commissioning

• Unpack the device and accessories fi rst.
• Then connect the Euro mains adapter to the repeater. Proceed as follows:
Press the adapter into the repeater guide.
Turn the adapter until the Euro adapter guide is completely concealed in the device.
Turn to the right by another 2 mm until you can gear a click.
☞
The mechanism is designed so that the Euro adapter can be inserted offset by 90°,
depending on how it fi ts best in the mains socket.
To remove the adapter again, you only need to push the unlocking button and then
turn the adapter to the left.
• Plug the plug-in device into a mains socket.
• If you want to confi gure the product with the web interface, connect your computer to the
network cable with a 1:1-connected with the mains socket of the repeater. We recommend
that you use the cable from the delivery scope.
Then switch on your computer and wait until the operating system has started up completely.
☞
For confi guration of the operating mode „Repeater" by WPS, connection to the com-
puter is not necessary!
35