Assembly; Maintenance And Cleaning - Conrad DECT Mode D'emploi

8. Assembly

• After registration, the DECT repeater can be disconnected from the mains grid. Then take
it into operation where you want to improve DECT handset reception.
• The DECT repeater can either be set up or suspended from the wall by a screw (there is a
wall mounting hole in the back of the DECT repeater for this).
Ensure that no cables or lines are damaged when drilling or screwing.

Select a place not close to electrical lines or devices.
Keep a sufficient distance to metal parts (e.g. heaters, metal doors).
Do not install several DECT repeaters next to each other; keep a minimum distance
of 10 meters between the DECT repeaters (at overlapping reception areas).

9. Maintenance and Cleaning

The product does not require any maintenance, never take it apart. Servicing or repair must
only be carried out by a specialist/specialist workshop.
To clean the outside of the product, a dry, soft and clean cloth is sufficient.
Dust can easily be removed with a long-hair, soft and clean brush and a vacuum cleaner.
Never use any aggressive cleansing agents or other chemical solvents since this
may damage the surface of the casing or even impair operation.
25