Expanded Confi Guration; Changing The Ip-Address - Conrad 98 69 22 Notice D'emploi

12. Expanded Confi guration
a) Changing the IP-Address
☞
Please observe that the operating mode „Repeater" requires changes of the IP
address of the product to be performed before basic confi guration.
In the operating mode „Access Point", you can do it after basic confi guration as well.
The actual confi guration is the same for both modes.
• For this, click "LAN Interface" in the web interface.
Change the IP address and the DHCP area according to your wishes.
Save the settings with by clicking "Apply Changes".
☞
If the DHCP server is set to „Disabled", e.g. when the device is already confi gured
for AP mode, you do not need to adjust the DHCP range. In this case, changing the
IP address is enough.
46