Conrad 98 69 22 Notice D'emploi page 47

• A change is sensible, e.g. if you want to change anything subsequently in the web interface
while the repeater or access point is already in operation.
For this, it is necessary, however, that you assign the device an address in your router's range.
• The following examples are to make confi guration easier for you.
Assume that your router has the IP address 192.168.1.1 and the DHCP range is limited to
192.168.1.100 to 192.168.1.150. Then you should not use the IP address or DHCP range of
your router.
For example, assign 192.168.1.200 as an IP address. As DHCP range, indicate 192.168.1.210
to 192.168.1.220.
☞
The IP addresses have to be in the range between 1 and 254. In this example,
they must be between 192.168.1.1 and 192.168.1.254. The other 3 sections are
variable.
• If you want to access to web interface,
you need to enter the changed IP ad-
dress into your browsers address line
accordingly.
47