Alarms And Alerts - POOL squad Ampero Notice D'utilisation

2.7.2. Alarms and alerts

DEFAULT
CONFIGURATION
ALARMS
Activated
ALERTS
* The corresponding alarm or alert is maintained while the detected fault remains in place, and the corresponding
message reappears a few moments after dismissal.
IMMEDIATE AUTOMATIC
MESSAGE
DISPLAYED /
FAULT
Production pH regulation
DETECTED
Yes
No
Yes
AUTOMATIC OPERATION(S)
UPON ACTIVATION
Message Immediate stop of production
displayed
STOP
POSSIBLE CAUSE
Unadjusted free
No chlorine rate
measurement
pH corrector
Yes
container empty
Cell problem
No
Insufficient salt rate
Electronics unit
power board
and/or pH regulation
Yes
No
CHECKS AND REMEDIES
Carrying out an adjustment of
the
measurement.
Replace the pH corrector
container.
Check that :
- the cell is not scaled.
- the electrical connections
to the terminals of the
cell are sufficiently tight
and not oxidised.
- the cell's power cable is in
good condition.
- the cell's power cable
connector
connected
electronics unit.
Check
necessary) the setting of
the
supplying power to the cell.
As a last resort, replace the
cell.
Check
manually with a recent test
kit.
Top
necessary, so as to obtain a
salt level of 5 kg/m
kg/m
equipment).
Contact a professional.
problem
DISMISSAL*
Press the OK or
or press and hold, depending
whether it is alarm or alert).
free chlorine rate
is correctly
to the
(and adjust if
current inversion
the salt level
up with salt if
3 (or 2.5
3 for Low Salt
button (press
OPTION TO
DEACTIVATE
VIA THE MENU
«
»
Yes
Yes
No
17