Keypad - POOL squad Ampero Notice D'utilisation

2.4. Keypad

COMMAND KEY
(depending on
model)
Switching on the electronics unit.
MENU Switching off the electronic box (press and hold), provided that no alarm or alert is
activated.
Access the menus.
Activation of Boost mode for a period of 24 hours (with a switch-on delay of a few moments).
BOOST
Water temperature display for a few seconds (only if the default display is set to « Online
display »).
T°C
Direct access to the menu «
Salt level display for a few seconds (only if the default display is set to « Online display »).
SALT
Direct access to the menu «
Direct access to the menu «
pH
Selecting a value or data element.
Cancelling a command.
Back to the previous (sub)menu.
Stopping Boost mode.
Dismissing an alarm or an alert (press or press and hold, depending on the alarm or the alert).
Command confirmation.
Entering a (sub)menu.
OK
Dismissing an alarm or an alert (press or press and hold, depending on the alarm or the alert).
A few minutes after switching on, production and pH regulation start automatically,
provided that these functions are not deactivated and certain alarms are not activated.
When switching off, the screen and the green LED turn off while the red LED comes on.
FUNCTION
» (press and hold).
» (press and hold).
» (press and hold).
6