Manual Injection; Bluetooth Communication - POOL squad Ampero Notice D'utilisation

2.6.23. Manual injection

Menu
Priming of the peristaltic
pump and filling of semi-
rigid pipes
pH corrector injection
Means of checking the
correct operation of the
peristaltic pump

2.6.24. Bluetooth communication

Menu Setting
Mode
Pairing*
Reset*
During a (non-automatic) update of the electronic box software carried out via Bluetooth :
- The 2 LEDs (red and green) flash alternately.
- The message «
Functions
From 30 s to 10 min,
Function
Activation/deactivation
communication
Detection of connectible devices near the
electronics unit (within 60 seconds)
Networking of the electronics unit and
connected devices
Removal of the network connecting the
electronics unit to the connected devices
* These settings do not appear if the mode is set to OFF.
» is displayed.
Possible settings
in 30 s increments
of Bluetooth
Setting
by default
To start injecting :
Confirm the selected setting.
(The peristaltic pump is
running,
countdown is displayed in
real time.)
1 min
To pause,
and to restart the injection :
Press on OK.
To stop the injection :
Press on
Possible settings
ON (to activate)
OFF (to disable)
Instructions
and the timer
.
Default setting
ON
-
14