Settings; Installation Of Accessories; Single-Use Trapper - FIM MEDICAL TABATABA V2 Manuel Utilisateur

3.2.

Settings

Press "OK/SETUP" to access TABATABA® V2 set-up in Expired mode. Parameter settings:
•
Date and time
•
Monitoring time
•
Two alarm thresholds
Use the "+" and "-" buttons to choose parameters from the scrolled messages: DATE, MONI and ALAR then
press "OK/SETUP". Each of these parameters is set using the "+" and "-" buttons and validated with
"OK/SETUP".
Order of time and date setting: day, month, year, hours, minutes
Monitoring time setting offers choices of 15mins, 1h, 8h or 24h
Order of alarm settings: low threshold alarm, then high threshold alarm
3.3.

Installation of accessories

3.3.1. Single-use trapper

Check the no-return membrane is present inside the trapper.
Warning: Trappers are single-use. Systematically change the trapper after each patient.
Warning: Used or dirty accessories must be disposed of with biological waste (DASRI).
Insert the trapper into the intended position in the housing.
Ce document est la propriété de la Société FIM MEDICAL. Il ne peut être reproduit ou communiqué sans son autorisation.
This document is the property of FIM MEDICAL. Its contents cannot be reproduced or divulged without the company's approval
No-return
membrane
Page 35 / 43