Publicité
Les langues disponibles
Les langues disponibles
12) Tighten the screw (A).
13) Position the other seedling holder in the same way.
Adjusting the small wheel load
Proceed as outlined below.
- Turn the knob (A) clockwise to increase the small
wheel (B) load on the ground.
- Turn the knob anticlockwise to decrease the load of
the small wheel on the ground.
Adjusting the planting unit load
The adjustment unit is usually mounted in position
(A2).
With the unit (A) in position (A1) the weight on the pack-
ing wheels can be reduced.
With the unit (A) in position (A2) the weight on the pack-
ing wheels can be increased.
B
D
UN41 0635MN
Proceed as outlined below.
1) As regards the position of the adjustment unit (A),
turn the handwheel (C) and the handwheel (D) to ap-
ply the ideal weight to the packing wheels.
English language
ADJUSTMENT INFORMATION
Repeat the same procedure to replace the ploughshares
of the other transplanting units.
UN41-0634MN
The unit (B) enables to increase or decrease the weight
applied by the unit (A) to the packing wheels.
The weight (load) to be applied to the packing wheels
is obtained by the combined action of the adjustment
units (A) and (B).
20
A
B
A1
A2
C
A
5
Use and maintenance
Publicité
