Topcom BPM WRIST 5331 Manuel D'utilisateur page 8

TOPCOM BPM Wrist 5331
4. When the right level is reached, the cuff will deflate.
This monitor will re-inflate automatically to approximately
220mmHg if the system detects that your body needs more
pressure to measure your blood pressure.
5. When the measurement is completed, systolic, diastolic
and pulse will be shown simultaneously on the LCD
screen.
6. When a mistake was detected during measurement the
Error icon
13 Memory
The BPM 5331 has 3 Memory zones. Each can store up to 30
measurements including the date and time
The result will be stored automatically in the selected Memory Zone
after the measurement.
To recall measurement results:
• Press the START/STOP button to activate the display.
• Press the UP or DOWN button to select the desired memory
zone.
• Press the MEMORY CALL button to see the average of all
measurement results.
• Press the UP button repeatedly to see prior stored
measurement results.
• To stop reading the data, press the START/STOP button to
switch back to normal time.
To erase all data from one memory zone:
• Press the START/STOP button to activate the display.
• Press the UP or DOWN button to select the desired memory
zone.
• Press the MEMORY CALL button to see the average of all
measurement results.
• Press the MODE and the DOWN button simultaneously to
erase all data from the selected memory zone.
8
appears on the display