Publicité
Les langues disponibles
Les langues disponibles
(d) Pruning of Standing Tree
Cut up from the bottom, finish down from the top.
WARNING
- Do not use an unstable foothold or ladder.
- Do not overreach.
- Do not cut above shoulder height.
- Always use both your hands to hold the saw.
When bucking on a slope always stand on the uphill side of the log, as
illustrated in Figure (e).
- When "cutting through", to maintain complete control release the cutting pressure near the end of
the cut without relaxing your grip on the chain saw handles. Don't let the chain contact the ground.
- After completing the cut, wait for the saw chain to stop before you move the chain saw.
Always stop the motor before moving from tree to tree.
2) Limbing
Limbing is removing the branches from a fallen tree.
When limbing leave larger lower limbs to support the
log off the ground.
Remove the small limbs in one cut as illustrated in
Figure (f).
Branches under tension should be cut from the bottom up to avoid binding the chain saw.
d.
e.
f.
Publicité
