Assembly Instruction - Nexgrill 720-0778B Manuel D'instructions

1. Caster Assembly
Mount the casters onto the bottom panel (B) using
sixteen 1/4-in. x 15-mm truss head screws with
locking washers (CC).
The swivel caster with brake (K) should be
positioned under the right
and the swivel caster (J) should be positioned
under right front as shown in Fig. 1.
The two stationary casters (L) should be positioned
under the left side.
Note: The gap of the two stationary casters should
be facing the inside bottom panel.
Turn over the bottom panel for assembling casters.
2. Door Bracket Assembly
Use two 5/32-in. x 10 mm
with locking washers (AA) to attach the L-
shape bracket (door stop) (S) to the bottom
panel (B) as shown in Fig. 2.
3. Side Panel Assembly
Use three 1/4-in. x 15 mm
with locking washers (CC) to connect the
bottom of the left side panel (G) to the bottom
panel (B). Make the left side panel flush with
the rear of bottom panel and tighten the
screws as shown in Fig. 3.
Repeat for the right side panel (H).
rear of the cart bottom
truss head screws
truss head screws
Assembly Instructions
Fig. 1
L
16X
CC
Fig. 2
2X
AA
S
Fig. 3
G
CC
6X
B
B
K
J
B
H
12