Nexgrill 720-0778B Manuel D'instructions page 14

Attach the firebox assembly (A) to the grill
cart using four 1/4-in. x
screws with locking washers (CC)
Note: Two screws with two washers for
each side of cart as shown in Fig. 7
6. Door Triangle Bracket Assembly
a) Loosen but do not remove the four screws which were pre-
assembled on the Left Side Panel (G) and cart frame, two
screws on cart Right Side Panel (G) and two on the cart
frame. Align the holes of the triangle bracket
screws on Left side panel (G) and cart frame.
b) Tighten the screws previously loosened in step 6a) as
shown in Fig.8
c) Repeat the steps a) and b) for attaching the triangle bracket
A (O ) to the Right Side Panel (H) and cart frame.
2
d) Loosen but do not remove the four screws which were pre-
assembled on the Left Side Panel (G) and Bottom Panel (B),
two screws on cart Right Side Panel (G) and two on the
Bottom Panel (B). Align the holes of the triangle bracket
(O ) with screws on Left Side Panel (G) and Bottom Panel
1
(B).
e) Tighten the screws previously loosened in step 6d) as
shown in Fig.8
f) Repeat the steps d) and e) for attaching the triangle bracket
B (P ) to the Right Panel (H) and bottom Panel (B)
2
7. Door Assembly
Attached the door handle (Q) to the each door (C)
using eight 5/32-in. x 10 mm
with locking washers (AA) as shown in Fig. 9
15 mm truss head
truss head screws
B (P ) with
1
P
1
G
O
A
1
16X
Assembly Instructions
Fig. 7
A
Fig.8
B
P
2
Fig.9
AA
8X
2X
O
2
H
T
14