Technical Information - EMAK CHEYENNE 92 Manuel D'utilisation Et D'entretien

1. TECHNICAL INFORMATION

1.1 Use
The machine model 92 4x4 or 110 4x4 under the brand name CHEYENNE - TONKAWA is a dual-axle
terrain riding mower designed for mowing maintained and unmaintained grass-covered level and
sloped areas up to an incline of 18° (32%), that are free of foreign objects (stones, fallen branches,
bones, hard items, etc.). It can be used to mow multi-year vegetation and various other weeds.
Any use of this riding mower, which is not described in this user's manual and
which goes beyond the use here described is considered to be in contradiction
to its intended purpose or use. The manufacturer of the machine is not responsible for
damages arising from such use; the risk is borne by its user. The user is also responsible
for adhering to the conditions prescribed by the manufacturer for the operation,
maintenance and repairs of this machine, which may only be used, maintained and
repaired by persons that know these conditions and have been informed about
possible dangers.
Only accessories, which have been approved by the manufacturer may be connected
to the machine. The use of other accessories will result in the warranty being
immediately void.
Remember that the accessories can cause injuries if used improperly or if the user fails to
understand how to make them work correctly. Pay attention at all times when using such
accessories.
1.2 Main parts of the riding mower
Lawnmower model 92 4x4 or 110 4x4 comprise of the following main parts:
(1) Hood with storage space
The hood is a combination of plastic and metal covers, which contain storage space for
the battery and the fuel tank.
(2) Frame with bumpers
The frame with bumpers serves as a bearing element for most of the main parts of the
machine.
(3) Front axle with wheels including steering*
The front powered axle enables the wheels to turn. The wheels are turned by the steering
wheel by means of a comb mechanism. All-wheel drive is engaged automatically, with
power distributed to the individual axles depending on the current traction conditions and
the travel mode (forward or reverse).
(4) Mowing deck
The mowing deck mows the grass. It is located under the machine. It consists of a cover,
main plate, blade holders and mowing blades. The deck is powered by the machine's engine
1.2
through an electromagnetic clutch and a V-belt.
(5) Engine, gear box including rear-wheel drive via a by-pass
The four-stroke petrol engine is mounted to the frame in the rear part of the machine. The
gear box with hydrostatic power transmission serves to change gears while driving. The
by-pass lever is located on the machine's rear plate. It serves to engage and disengage
the gear box for the rear wheels.
(6) Folding frame of the machine
The folding frame is intended to prevent the machine from rolling over by 180° if for any
reason it loses stability and rolls on to its side.
(7) Driver's location
The comfortable seat enables easy access to all control elements on the machine. The
seat used ensures safe and comfortable operation.
62